Tecfluid LU Series - Manual (Page 16)

16
The remaining screens will require the parameters in the chosen mode.
5.5 Current output
Next, the loop current programming screens are displayed.
On the first screen the user can program the level (or distance) at which the instrument
will give 4 mA at its output (lower range). Next, the level (or distance) at which it will give
20 mA (upper range) is programmed.
The level "lower range" can be higher than the "upper range" or vice versa.
5.4 Default display mode
Display modes of distance and level explained in section 4.2 can be programmed as
modes by default. Thus, the instrument will always be working in this mode even if there is
a power fail.