6 network, 1 lan, 2 wireless – Teletronics EZMIMO User Manual
Page 7: 6 network 1.6.1 lan
www.teletronics.com
1.6 Network
1.6.1 LAN
LAN Configuration page is used to setup the Connection Type, IP Address, Netmask,
Default Gateway, and DNS Servers. In the Connection Type, there are two options,
“Static IP” or “DHCP.” In Static IP, you will have to manually enter the IP Address,
Netmask, Default Gateway, and DNS Servers. In DHCP, the device will receive its IP
Address, Netmask, Default Gateway, and DNS Servers from a DCHP server.
Figure 13.
1.6.2 Wireless
This page is to configure the wireless interface of the device. Here you can configure
the Channel, Bandwidth, Auto Adjust Times, Mode, ESSID Broadcast, DFS/TPC,
WDS, Tx Power, RTS, Fragmentation, ESSID, Encryption Type, and MAC Filter.
When click the RADIO1, following website will be display.
7 / 7