Teletronics EZPlatform - Manual (Page 15)

15
5.3.2. LAN
The LAN page is shown in Figure 10.
Figure 10. LAN page
DHCP Server
Enable DHCP server: whether the EZPlatform™ should act as DHCP server and thus
automatically configure the IP settings of DHCP clients.
ƒ Yes
ƒ No
Starting IP address: the first IP address that will be used in the configuration of DHCP clients.
Ending IP address: the last IP address that will be used in the configuration of DHCP clients.
Subnet mask: the subnet mask that will be used in the configuration of DHCP clients.
Default gateway: the default gateway that will be used in the configuration of DHCP clients.
Preferred DNS server: the preferred DNS server that will be used in the configuration of DHCP
clients.