Teletronics EZ Bridge 802.11G - Manual (Page 32)

32
Default subnet mask
The factory subnet default value is 255.255.255.0
Default gateway
The factory gateway default address is 192.168.1.1
Security
Set up the administrative login name and password for the bridge.
User name
This is the user name that you must type when logging into the web
interface.
Administrator password
This is the password that you must type when logging into the web
interface. You must enter the same password into both boxes, for
confirmation.
Commands
Reboot bridge
All changes from the web interface will not take effect until the Reboot.
Reset to factory defaults
Reset all changes made to the bridge back to factory defualt
Upgrade firmware
Upload firmware from a selected source path.