Thinklogical Velocitykvm-34 Quick Start Guide - Manual

100-240V-,0.5A, 50/60 Hz T 2A ,250VAC
CAUTION! Replace with same type and rating fuse.
CNTRL
LINE OUT HOST
USB HID
U
P
D
A
T
E
S
PWR FOL
USB 2.0
SER IAL PORT
DVI OUT 1 DVI OUT 2 DVI OUT 3 DVI OUT4
STEP 6: Four DVI-D cables (CBL-000009-002MR) are
included. Connect one each to the CPU’s DVI 1, 2, 3 and 4
Video Cards and the other ends to the VelocityKVM
Transmitter’s DVI IN 1, 2, 3 and 4 ports.
UPDATES
DEV DVI IN 2 DVI IN 4 DVI IN 3 DVI IN 1
SER IAL PORT
L2 L3
LINE IN
MIC OUT HID
P
S
2
P
S
2
LOCAL FROM CPU
U S B 1 .1
U S B 1 .1
USB HID
HOST
CNTRL
CAUTION! Replace with same type and rating fuse.
100-240V-,0.5A, 50/60 Hz T 2A ,250VAC
CLINK
PWR
CP
FOL
6
4
3
USB 2.0
Audio OUT►
Audio IN◄
PS/2 Keyboard
PS/2 Mouse
USB HID (Kybd/Mouse)
USB 1.1 (Kybd/Mouse)
PS/2
Kybd/
Mouse
USB
HID
USB 1.1
8
▲
Audio
OUT
5
2
3
VelocityKVM-34 Transmitter
VelocityKVM-34 Receiver
STEP 7: If desired, connect your local
keyboard and mouse by inserting the PS/2 or
USB HID connectors into the VelocityKVM
Transmitter’s local devices receptacles.
STEP 4: Connect your Multi-Mode Fiber Optic cables
between the Transmitter and Receiver units. Connect:
STEP 1: Ensure that the POWER
ON/OFF switch is in the OFF
position (0) on both the Tx and Rx
units. Connect the supplied AC
Power Cords to both units and plug
them into a standard AC supply.
LEAVE BOTH SWITCHES IN THE
OFF POSITION.
STEP 5: Connect
your KVM devices
to the CPU using
the cables supplied
in KIT-000005-R.
STEP 3: Turn the
Receiver unit ON (1).
STEP 2: Connect your desktop
devices (monitors, keyboard,
mouse, etc.) to the Receiver
using standard cables.
Each Thinklogical™ Velocity kvm-34 Multi-Mode Fiber Optic System consists of a transmitter unit and a receiver unit connected by five multi-
mode fiber optic cables. The transmitter unit connects to the computer with standard cables and the receiver unit provides connections to the user
interface devices. The Velocity
kvm-34 supports PS/2, full duplex stereo audio, serial (RS-232), USB 1.0 (HID) device ports and USB 1.1. USB
2.0 (high speed up to 480Mbps) is optional.
Note: Be sure to
leave adequate ventilation
space on both sides of the
units (2” minimum),
especially if the units are
being stacked
CONTENTS
Upon receiving your Thinklogical
Velocity
kvm-34 Extender, you
should find the following items:
7
Local PS/2
Connectors
Local USB HID
Connectors
9
STEP 9: Turn on the Source
(CPU) last. Verify that all
system features are
functioning properly.
Visit us online at www.thinklogical.com for more
product information, current updates and the
complete line of Thinklogical™ products.
TM
MIC IN
Copyright c 2009. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
8 Mounting bracket
screws
Fo ur Head S in gl e Li nk
Velocity kvm-34
Fi ber Opt ic Tran smitt er
2 Mounting bracket screws
in four places.
RACK-MOUNT OR DESK-TOP
OPTIONS: Like all
™
KVM extenders, the Velocity KVM-34
can be mounted in a standard EIA 19"
rack or on a shelf or desk-top.
Velocity kvm-34
L1 L4 L5
L5
VelocityKVM Extender Transmitter
VelocityKVM Extender Receiver
2 AC power cords, PWR-000006-R
(International connections may differ.)
VelocityKVM Extender Cables:
4 DVI-D Male Cables, 2 meters, CBL-000009-002MR
1 Cable Kit (8 six ft. peripheral cables.) KIT-000005-R
VelocityKVM Extender Product Manual
All physical connections to the product use industry-standard connectors.
STEP 8: Turn the
Transmitter unit ON (1).
L1/Tx to L1/Rx, L2/Tx to L2/Rx, L3/Tx to L3/Rx, L4/Tx to L4Rx
and L5/Tx to L5/Rx.
Multi-Mode Fiber-Optic
Cable Guide:
L1: Data Tx to Rx and Video 1
L2: Data Rx to Tx
L3: Video 2
L4: Video 3
L5: Video 4
QUICK START
GUIDE
Multi-Mode Fiber Extension – Four DVI Displays
PS/2 or USB
connectors
L2 L3 L1 L4
Audio IN►
5
1
DVI
Display 1
2
3
4
Each mounting bracket is secured
by four screws and can be safely
removed from the transmitter or
receiver unit for desk-top mounting
after power has been removed from
the unit.
L1 L2 L3 L4 L5
PHONE: (800) 291-3211
WEBSITE: www.thinklogical.com
EMAIL: [email protected]
VELOCITY-34_Quick_Start_Rev_C