Tri Tool 206B Beveler - Manual (Page 26)

26
TRI TOOL INC.
92-0211 : Rev. 050224
JAW BLOCKS AND RAMPS
ID
RAMP
SET
BLOCK
P/N
MOUNTING
RANGE
Standard Not Required
1.63" to 2.18" ID
(41.4 mm to 55.4 mm ID)
Standard 08-0162
2.08 " to 2.65" ID
(52.8 mm to 67.3 mm ID)
Standard 08-0163
2.55" to 3.12" ID
(64.8 mm to 79.2 mm ID)
Standard 08-0164
3.02" to 3.60" ID
(76.7 mm to 91.4 mm ID)
Standard 08-0165
3.50" to 4.08" ID
(88.9 mm to 103.6 mm ID)
Extended Not Required
3.98" to 4.55" ID
(101.1 mm to 115.6 mm ID)
Extended 08-0162
4.47" to 5.05" ID
(113.5 mm to 128.3 mm ID)
Extended 08-0163
4.95" to 5.53" ID
(125.7 mm to 140.5 mm ID)
Extended 08-0164
5.43" to 6.01" ID
(137.9 mm to 152.7 mm ID)
Extended 08-0165
5.91" to 6.49" ID
(151.1 mm to 164.8 mm ID)