Tri Tool 208B Elbow Mandrel - Manual (Page 7)

7
Model 208B EM (Elbow Mandrel)
92-1496 : Orig. 100920
SPECIFICATIONS
DESIGN AND OPERATING FEATURES
The elbow mandrel can be set up in the bore before the 208B is installed onto the
mandrel shaft.
The mandrel heads have interchangeable contact pins to allow configuring mandrel
sub-assemblies for different inside diameter mounting ranges.
A perch length of only .75" (19.1 mm) is required.
Self-centering, push rod actuated locking.
SPECIFICS
Weight
15 lbs (33.1 kg)
Pipe Holding Capacities
Basic Pipe Sizes
2" - Schedule 20 through 160
2 1/2" through 6" - All Schedules*
8" - Schedule 20 through schedule 160
*Not recommended for schedule 10 and lighter pipe unless a butt weld
prep only is required.
Inside Diameter Mounting Range
1.63" (41.4 mm) through 8.40" (213.3 mm)
Mounting
.75" (19.1 mm) axial length, 3 pin contact.