Scale removal, Disinfecting, Cleaning – Duracraft Baby's Breath Vaporizer DH-711 User Manual

Page 7

Advertising
background image

CLEANING

D A I L Y

We recommend cleaning the vaporizer daily by wiping all surfaces dry using a

paper towel or soft sponge. It is normal for mineral deposits to collect at the

bottom of the Base. Deposits may appear as black flecks and should be rinsed

out after every use.

W E E K L Y

The vaporizer should also be cleaned once a week, according to the instruc-

tions listed below.

Cleaning involves two steps SCALE REMOVAL and DISINFECTING. Be sure to

perform these in the proper order to avoid harmful chemical interactions.

•Unplug the vaporizer. Wait at least 10 minutes for the unit to cool.

•Remove the Steam Assembly and set aside.

•Discard any remaining water from the Base.

•Clean all outside surfaces with a dry, soft cloth. DO NOT USE WATER. THIS

MAY DAMAGE THE VAPORIZER OR CAUSE ELECTRIC SHOCK.

STEP ONE:

SCALE REMOVAL

1. Fill the Base with either:

• one cup (8 ozs) of undiluted

white vinegar

OR

• DuraRinse™ Humidifier

Cleaner, part no. AC-816,

following bottle instructions

2. Let solution stand for 20 minutes.

3. With the vinegar or DuraRinse™

in the Base clean all interior

surfaces with a soft cloth or

brush to help remove scales.

4. Rinse the Base thoroughly with

water to remove scale and

cleaning solution.

STEP TWO:

DISINFECTING

1. Fill the Base with:

• 1 teaspoon of household bleach

• 1 gallon of water.

2. Let stand for 20 minutes.

3. Rinse with water until the odor of

bleach is gone.

NOTE: THE USE OF OTHER WATER TREATMENT PRODUCTS, SOAPS, DETER-

GENTS OR ABRASIVE CLEANERS NOT RECOMMENDED IN THE MANUAL

MAY CAUSE DAMAGE TO THE VAPORIZER OR AFFECT PERFORMANCE.

Advertising