Daktronics All Sport 5000 - Manual (Page 161)

144 Hockey Options
LCD Display Action
MENU-TIME OF DAY
BLANK GAME DATA?
If 2-tod is selected, this message will be displayed.
Press <ENTER> to blank all game data on the
scoreboard except for the Time of Day digits.
9.5 Settings
The following settings can be edited by the user when EDIT SETTINGS has been selected
from the Main Menu.
Main Clock
Note 1: The settings entered for Main Clock are used with the <SET MAIN CLOCK> key.
Note 2: The period, break, and overtime lengths are used differently depending on the
direction of the main clock. For count down, the main clock is set to the selected length,
decrements towards zero, and stops at zero. For count up, the main clock is set to zero,
increments towards the selected length, and stops when the selected length is reached.
LCD Display Action
MAIN CLOCK-MODE
TENTH SECOND? n
n = current setting
When the main clock is set to count down and
tenths of a second is selected, the main clock
displays in tenths of a second remaining when the
time is below one minute.
Press <YES> to set the main clock to display tenths
of a second.
Press <NO> to display whole seconds.
MAIN CLOCK-TIME
PERIOD mm:ss
mm:ss = current setting
Enter the correct amount of time per period in
minutes and seconds on the number pad and press
<ENTER>.
For example, 20:00 per period.
Note: Pressing <ENTER> to select the period time
as the main clock setting will increment the current
period number if the clock value was previously
zero.
(Continued on next page)