Ultimate-sound Power Sub - Manual (Page 4)

STEP 2
C
ONNECTING
T
HE
S
UBWOOFER
A) Line Level Connection (known as "Low-Level"):
Connect the audio/video receiver or processor’s subwoofer output, to the Ultimate Subwoofer’s input.
B) Speaker Level Connection (known as "High-Level"):
Connect the audio/video receiver’s Left/Right main channel outputs to the Ultimate L/R Speaker Level
Inputs. Make sure to connect "+" (Red) to "+" ( Red), and "-" ( Black) to "-" (Black). (Optionally, you
may connect your Left/Right speakers as shown below).
H
IGH
-L
EVEL CONNECTION
T
IP
:
When using small satellite speakers, connecting the Ultimate subwoofer with the Speaker Level inputs
and then connecting L/R satellites to the "Speaker out" will automatically limit the low frequency sent
to the small speakers with the high-pass filter built into the Ultimate subwoofer. This is helpful to small
speakers, in that they will then not be required to reproduce frequencies that may be beyond their oper-
ating range.
You may now plug your subwoofer’s power cord to the A/C wall outlet.
You are now ready to use your new Ultimate subwoofer.
4
Diagram 2
L + - R + -
FROM AMPLIFIER
HI LEVEL IN HI LEVEL OUT
TO SPEAKERS
L + - R + -
Diagram 3
Subwoofer Line-Level/Low-Level Input
Subwoofer High-Level/
Speaker-Level Input