Ultimate-sound Korus MKII Sub - Manual (Page 3)

Step 2
Connecting The Subwoofer
A) Line Level Connection (known as "Low-Level"):
Connect the audio/video receiver or processor’s subwoofer output, to the Ultimate Subwoofer’s L/R or LFE
Line Level input.
B) Speaker Level Connection (known as "High-Level"):
Connect the audio/video receiver’s Left/Right main channel outputs to the Ultimate L/R Speaker Level Inputs.
Make sure to connect "+" (Red) to "+" ( Red), and "-" ( Black) to "-" (Black). (Optionally, you may connect
your Left/Right speakers as shown below).
High-Level connection Tip:
When using small satellite speakers, connecting the Ultimate subwoofer with the Speaker Level inputs and then
connecting L/R satellites to the "Speaker out" will automatically limit the low frequency sent to the small speak-
ers with the high-pass filter built into the Ultimate subwoofer. This is helpful to small speakers, in that they will
then not be required to reproduce frequencies that may be beyond their operating range.
You may now plug your subwoofer’s power cord to the A/C wall outlet.
You are now ready to use your new Ultimate subwoofer.
Subwoofer Line-Level/Low-Level Input