Daewoo DSA-9310E - Manual (Page 9)

REAR
PANEL
9
1. AV1, AV2 INPUT TERMINAL ( SCART TERMINAL ).
Use to connect external input such as VTR, Satellite Receiver, DVD, etc. to the
RECEIVER.
2. POWER CORD CONNECTOR
Use to connect POWER CORD to the RECEIVER.
3. MONITOR / AUDIO OUTPUT TERMINAL
Use to connect MONITOR or external speaker to the RECEIVER.
4. PC INPUT / AUDIO INPUT TERMINAL
Use to connect PC input to the RECEIVER.
PC input is transferred to output terminal when the power of RECEIVER is off.
5. AV3 INPUT TERMINAL (S-VIDEO, V/L/R)
Use to connect S-VIDEO, A/V Input to the RECEIVER.
S-VIDEO input is transferred to output terminal when S-VIDEO and RCA Video input is
connected to the RECEIVER at the same time.
6. A/V4 INPUT TERMINAL(V/L/R)
Use to connect A/V input to the RECEIVER.
7. ANTENNA INPUT TERMINAL
Use to connect antenna to the RECEIVER.
* This RECEIVER can receive PAL/ SECAM except PAL M/N via antenna and can receive
PAL SECAM, NTSC input via external input terminal.
1 2 3 4 5 6 7