Exmark Quest Bagger 850 - Manual (Page 10)

Operation
Product Overview
Figure 4
1. Hood 3. Upper flexible tube
2. Bag 4. Lower tube
Operation
Note: Determine the left and right sides of the
machine from the normal operating position.
Emptying the Grass Bags
Be careful when lifting or handling a grass bag that is
full. To empty the grass bags:
1. Move the motion control levers outward to
neutral position, disengage the power take off
(PTO), engage parking brake, stop the engine,
remove the key, and wait for all moving parts to
stop before leaving the operating position.
2. Open (raise) the hood.
3. Compress debris into the bags. With both hands,
lift up on the bag and unhook it from the retaining
bracket. Empty the bag. Repeat the procedure
for the other bag.
4. Install the bags by sliding the bag frame hook
onto the retaining bracket (Figure 5).
Figure 5
1. Bag frame hook 2. Retaining bracket
5. Lower the hood onto the bags.
Clearing Obstructions from
the Bagger
1. Move the motion control levers outward to
neutral position, disengage the power take off
(PTO), engage parking brake, stop the engine,
remove the key, and wait for all moving parts to
stop before leaving the operating position.
2. Check the grass bags and empty them if they are
full.
3. Remove and separate the discharge tube and
chute from the bagger hood and mower. Using a
stick or similar object, carefully remove and clear
10