Watson-Marlow EBU250 - Manual (Page 8)

Operator’s manual
EBU250
Rev.: 1.01 Date: 2007-02-20 Page 8 of 8
File:
EBU250 OM 1.01 EN.DOC
This operates as described in this manual with one addition. When <2> is entered, the speed is
reduced with 1mm/sec, and when <3> is entered, the speed is increased with 1mm/sec.
The last menu displays the text:
F51 FILL SPEED (2:DEC/3:INC): I 1
F47: PRINTER-SETUP
F48: RS232-SETUP F49: BALANCE SETUP
F51: NEEDLE F53: DRIVES ON/OFF
Fig. 6.6
Here it is possible to start the filling sequence by <disp><GO> and then trim the fill speed (speed of
nozzle moving upwards) to follow the product surface by pressing <2> for reduced speed or <3> for
increased speed. The actual fill speed is shown in millimetres/sec.
7. Technical specifications
Technical specifications
Power supply
230 VAC
Capacity 200 Watt.
Casing Stainless steel
Holder Delrin
Filling Speed
1-250 mm/sec.