Watson-Marlow GD30P - Manual (Page 12)

OPERATORS MANUAL Machine Type: GD30P
GD30P OM 1.01 EN Ver 1.01 Date 2006-10-24 Page 12 of 14
7 INTERFACE AND CHANGE OF POWER
7.1 Interface
Fig. 6
(1) Flexnet 1-3:
pin 1. FLEXNET /DATA
(PIN 1 ON FLEXNET DIN CONNECTOR)
pin 2. FLEXNET GND
(PIN 3 ON FLEXNET DIN CONNECTOR)
pin 3. FLEXNET DATA.
(PIN 4 ON FLEXNET DIN CONNECTOR)
(2) External 4-9: pin 4. START SIGNAL. +5 TO +50 VDC.
POSITIVE EDGE TRIGGERED.
pin 5. +24 VDC OUTPUT
pin 6. GROUND
pin 7. STATUS OUTPUT SIGNAL. OPEN COLLECTOR.
GROUNDED WHEN DRIVE IS ACTIVE
pin 8. STATUS OUTPUT SIGNAL. OPEN COLLECTOR.