Watson-Marlow EC 25 - Manual (Page 21)

Revision 4.4 / November 2010
21
25 Assembly
The assembly has to be done in the same instruction order as the disassembly.
25.1 Assembly „Rotor-Assembly“
During mounting of the
Rotor-Assembly the noses of
the Guide rail mustn’t be
laid on the surface of the
Rotor. To achieve this you
have to fit Scraper and
Guide rail in a position that
the noses of the Guide rail
are touching the gable end
of the Rotor.
After that you have to put the
assembly unit non-violently
into the Liner.