Epson 1520 - Manual (Page 3)

Quite simply, Hy-Rez QuikRIP is a set of highly calibrated configura-
tion settings and postscript printer description files that run within
CADlink PhotoScript.
These allow an ordinary Epson 3000 or 1520 ink jet printer to gener-
ate accurate imagesetter-style film positives for use within the
screen printing industry.
Without an application (RIP) such as this along with the screenprint
specific calibration our product provides, it would be impossible to
generate any form of usable halftones with your ink jet printer!
What Exactly Is Hy-Rez QuikRIP?
Getting Started
Note: If not already completed, the drivers included with your
Epson 3000 or 1520 printer must be installed. These are needed
to perform general maintenance on the printer such as head
cleanings. However, DO NOT install the Epson Stylus RIP Postscript
Driver!
The installation of this driver will cause conflicts with PhotoScript
and Hy-Rez QuikRIP. If this driver has been installed, remove all
software associated with the printer and reinstall only the printer
driver, omitting the Epson Stylus RIP Postscript Driver.
It is VITAL to first install PhotoScript prior to running the Hy-Rez
QuikRIP installer!
If PhotoScript is not installed first, the RIP will not function properly.
Carefully follow the installation instructions in the PhotoScript
manual and make sure NOT to have the dongle inserted during in-
stallation.
When prompted to select your printer during installation, only install
the driver for “your” printer, the Epson 3000 or 1520. Do not simply
check the Epson box. Doing so will install drivers and print modes
for an excessive number of printers.
3