Welltech SIPPBX 6200 V.1.0 Quick Start - Manual (Page 19)

Welltech Computer Co., Ltd.
- Set Mode to Proxy
- Set Primary/Secondary/Outbound Proxy IP Address/Port with
SIPPBX 6200 SIP Service Interface IP address (e.g. 192.168.16.10).
- Set Line1 Number/Account/Password with 101
- Set Line2 Number/Account/Password with 102
- Set Line3 Number/Account/Password with 301
- Set Line4 Number/Account/Password with 302
Step 3: Click System Configuration in the navigation panel and open the
System Configuration screen as figure 3.29.
Figure 3.29
- Keypad type: RFC 2833
- RFC 2833 Payload type: 101
- FAX Payload type: 102
Step 4: Click Commit Data in the navigation panel and open the Commit
Configuration Data screen as figure 3.30, then click COMMIT button.
SIPPBX 6200 Quick Guide – V1.0 - 19 -