Westermo MDI-110-F3x - Manual (Page 2)

Introduction
MDI-110-F3G: The MDI-110-F3G is a 10-port Managed Gigabit Industrial Ethernet switch equipped
with 7-port 10/100TX and 3 combo ports for Gigabit copper and SFP for gigabit uplink.
MDI-110-F3: The MDI-110-F3 is a Managed industrial Fast Ethernet Switch, equipped with
7 ports 10/100TX and 3 Fast Ethernet Copper / 100-FX combo ports.
For Managed switch, the software supports full L2 management features, ring redundancy, network
control, security and alert features. It also supports RS-232 console for out of band management.
Hardware Installation
4MDI series Industrial Switch.
4Quick Installation Guide
4CD User Manual
4Wall Mount plate and Mounting kit
4RS-232 DB9 to RJ-45 console cable
Mounting the unit
You can mount the din-rail clip on the rear of MDI series on
the DIN rail.
Grounding MDI
There is one grounding screw on the bottom side of MDI
Switch. Connect the frame grounding of MDI Switch to the
grounding surface to ensure safety and prevent noise.
© W estermo
Teleindustri
AB
www.westermo.com
Industrial Gigabit Switch
MDI-110-F3G
MDI-110-F3
Quick Installation Guide