Westermo RFIR-xxx - Manual (Page 19)

19 6641-22810
LED indicators Power/CPU
LED Status Description
ON OFF Unit has no power.
GREEN All OK, no alarm condition.
RED Alarm condition, or until unit has
started up. (Alarm conditions are
configurable, see ''WeOS Management
Guide'').
BLINK Location indicator ("Here I am!").
Activated when connected to IPConfig
Tool, or upon request from Web or
CLI.
DC1 OFF Unit has no power.
GREEN Power OK on DC1.
RED +DC1 input voltage is below operating
voltage limit
DC2 OFF Unit has no power.
GREEN Power OK on DC2.
RED +DC2 input voltage is below operating
voltage limit
AC1 OFF Unit has no power
GREEN Power OK on AC1
FRNT OFF FRNT disabled.
GREEN FRNT OK.
RED FRNT Error.
BLINK Unit configured as FRNT Focal Point.
RSTP OFF RSTP disabled.
GREEN RSTP enabled.
BLINK Unit elected as RSTP/STP root switch.
USR1 Configurable, see WeOS Management Guide
TX/FX ports OFF No link.
GREEN Link established.
GREEN
FLASH Data traffic indication.
YELLOW Port alarm and no link. Or if FRNT or
RSTP mode, port is blocked.