Westermo SD-300 - Manual (Page 10)

10 6642-2201 10
6.3 DIP switch settings
DIP-switches are accessable under the lid on top of the unit. DIP-switches are
used to configure the modem.
Warning!
Prevent damage to internal electronics from electrostatic discharges (ESD) by
discharging your body to a grounding point (e.g. use of wrist strap), before the
lid on top/front of the modem is removed.
Warning! Do not open connected equipment.
Prevent access to hazardous voltages by disconnecting the unit from AC/DC
mains supply and all other electrical connections.
!
!
NOTE
When configuration via DIP-switches, the settings of DIP-switches configure the unit only
after a reboot (power off/on).