Epson POWERLITE CINEMA 200 - Manual (Page 36)

36
Screen Options
■ Message
Turn this setting off if you want to prevent on-screen messages from appearing (such as
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
■ Background Color
Changes the screen that’s used when the projector is not receiving a signal or when you
press the
Blank button to temporarily stop projection. Select Blue (instead of Black ) or
Logo to display the EPSON logo on a black background.
■ Startup Screen
Turn this setting off if you want to prevent the EPSON logo from appearing while the
projector is warming up.
Other Setup Options
■ Keystone
Adjusts the shape of the image, if the left and right sides are not parallel after tilting the
projector up or down at the screen (see page 19).
■ Projection
Mirrors and/or inverts the image for front, rear, and overhead projection.
Setting ! On-Screen Display ! Message
Setting ! On-Screen Display ! Background Color
Setting ! On-Screen Display ! Startup Screen
Setting ! Screen ! Zoom Caption
Setting ! Screen ! Projection