Extron Electronics P-2 DA8 Series - Manual (Page 25)

P/2 DA8 and P/2 DA12 • Reference Information A-3
Sync
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs; bi-level
and tri-level sync
Output type .................................... RGBHV, RGBS, RGsB, RsGsBs; bi-level
and tri-level sync (follows input)
Tri-level on Y, R-Y, B-Y channels
(component video 720p, 1080i, 1080p)
Bi-level on Y channel (for all other
component video rates)
Input level ...................................... 2.0 V to 5.0 Vp-p (TTL)
Output level ................................... 0.3 Vp-p for component video (bi-level
sync)
0.6 Vp-p for component video (tri-level
sync)
TTL: 5.0 Vp-p, unterminated for RGBHV,
RGBS
Input impedence ........................... 10k ohms or 510 ohms (default), selectable
Output impedence ........................ 50 ohms or 75 ohms (default), selectable
Max. propogation delay ............... 90 ns
Max. rise/fall time ........................ 2 ns
Polarity............................................ Positive or negative (follows input)