Widex SCOLA Buddy - Manual (Page 25)

CONNECTING HEADPHONES TO THE AUDIO
OUTPUT (SPECIAL SETTING)
NB: The following setting is only possible
when SCOLA BUDDY is configured using a SCOLA-
PROGRAMMER at your SCOLA provider .
SCOLA BUDDY can be supplied with the 3 .5 mm jack
socket configured as an output, for use with stand-
ard headphones . In this case, when the headphones
are connected, the FM signal will be routed to the au-
dio output instead of to the telecoil .
Without headphones connected, the tele-loop func-
tion will be active .
Connect the headphones to the 3 .5 mm jack socket
in the SCOLA BUDDY unit .
With the FM transmitter switched on and receiving
on the correct channel, listen to the FM signal in the
headphones .
Adjust the volume on the SCOLA BUDDY to an ap-
propriate level .
The setting will be remembered by the SCOLA BUD-
DY device after switch-off .
The volume setting is specific for the headphone
output, and will not affect other settings .
25