Enterasys Networks Enterasys Matrix 6H352-25 - Manual (Page 14)

Structure of This Guide
xii About This Guide
STRUCTURE OF THIS GUIDE
This guide is organized as follows:
This preface provides preliminary information to aid in using this manual, lists technology and
user guides that may help the user set up and manage the 6H352-25, and gives instructions on how
to get help from Enterasys Networks.
Chapter 1 , Introduction , provides an overview of the module and its features.
Chapter 2 , Network Requirements , outlines the network requirements that must be met before
installing the module.
Chapter 3 , Installation , provides instructions on how to install the 6H352-25, and connect
segments to the module.
Chapter 4 , Troubleshooting , describes the function of the LANVIEW LEDs, which can help to
quickly diagnose network/operational problems.
Appendix A , Specifications , contains information on functionality and operating specifications,
connector pinouts, environmental requirements, and physical properties.
Appendix B , Mode Switch Bank Settings and Options , describes how to set the Mode Switch
and install options.
RELATED DOCUMENTS
The following documents may help to set up and manage the 6H352-25:
• MATRIX E7 Series and SmartSwitch 6000 Series Modules Local Management User’s Guide
• MATRIX E7 Overview and Setup Guide
• 6C105 SmartSwitch 6000 Overview and Setup Guide
• Ethernet Technology Guide
• Cabling Guide
• SmartTrunk User’s Guide
• Any applicable HSIM or VHSIM documentation
The manuals listed above can be obtained from the World Wide Web in Adobe Acrobat Portable
Document Format (PDF) at the following site:
http://www.enterasys.com/
NOTE: All documentation for the Enterasys Networks SecureFast VLAN Manager
software is contained on the VLAN Manager CD-ROM.