Widex RC3-1 - Manual (Page 20)

20
Short-term logging
If switched on by your hearing care professional, the
short-term logging function in your RC3-1 remote
control allows you to record a specifi c, problematic
listening situation. Th
e hearing care professional can
then analyse the recorded situation using special
software. Th
e remote control is used to start the re-
cording. Th e recording is made through the hearing
aid and lasts one minute.
To start recording:
Press and hold down the centre
key [1] of the activated or de-
activated remote control while
pressing the lower right key [3].
Your hearing aid will start re-
cording the acoustic situation
you are in. Th
e remaining time of
the short-term logging is shown
in the remote control display. When you use the
short-term logging function again, your previous
recording will be replaced by the new recording.