Xoro HRS 8540 - Manual (Page 12)

11/31
5. DiSEqC 1.1: Press the VOL+/VOL- button to select the required DiSEqC1.1
input.
6. 22kHz: Press the VOL+/VOL- button to select ON, OFF.
7. Polarity : Press the VOL+/VOL- button to select horizontal, vertical or auto.
Recommendation: Use the option Auto!
4.3.1 Antenna Setup for DiSEqC 1.2
1. Select Motor Antenna in
Antenna Connection.
2. Enter Antenna Setup, navigate
with the arrow key DOWN to the
Motor Type option and select the
DiSEqC1.2 by VOL+/VOL- button.
3. Navigate with the arrow key
DOWN to the Motor Setting option
and press the OK button.
Motor Setting
Satellite/ Transponder
Select a Satellite and a Transponder.
Position No. & Save
Press the VOL+/VOL- button and
select one of the 64 settings (0 to
63). You also can press the numeric
keys directly to input the Position
No.
Go to x
Press the OK button and select one
of the 64 settings (0 to 63). Confirm your selection with the OK button and it appears
a message on the screen "Wait to move the position!”
Save