Classic line – X-Treme Audio Classic Line User Manual
Page 6

4 Ohm connection
2,6 Ohm connection
Configurazione a 8 Ohm
Configurazione a 4 Ohm
XTH
XTL
XTS
Configurazione a 2,6 Ohm
8 Ohm configuration
4 Ohm configuration
XTH
XTL
XTS
2.6 Ohm configuration
Examples:
XTH
XTH
XTL
XTL
XTS
XTS
XTH
XTH
XTL
XTL
XTS
XTS
With the rear edges touching, the inter-cabinet angle between en-
closures is the right one for having a correct overall dispersion. The
nominal crossover point between the XTH and XTL is 200 Hz, an
LPF on XTH - set at 200 Hz (slope >20 dB/oct) - and a HPF on XTL
- at 150 Hz - are suggested.
Recommended crossover cut for subwoofers is 120 Hz.
X-Treme Classic Line systems combined with the appropriately
configured controller exhibit an essentially flat on-axis frequency re-
sponse.
Equalization to compensate for a particular acoustic environment
mat be performed where required. When speakers are vertically po-
sitioned in many different clusters, they may benefit from equaliza-
tion adjustement to reduce the effect of mid-low frequency build up
inherent in the use of multiple arrayed enclosures.
6/7