AEC OFC Series - Manual (Page 14)

Extrusion Control & Extruder Monitor Units Chapter 2: Functional Description 13
Controller Features
• Operator control panel with LCD display
• Printer port and RS-485 communications port
• Material inventory up to 999,999 lbs./Kg.
• Haul-off or extruder speed control software with digital potentiometer to replace
extruder speed pot or haul-off speed pot
• Weight per length control to plus/minus ½% of maximum extruder rate
2-4 Options
Options marked with “*” indicate options that can be factory installed or retrofitted in the
field.
• Additional digital speed potentiometer for dual control
• Speed adjust module (not available for extruder monitor unit)
• RCP-RS 485 remote control panel with 10 ft. cable, 100 ft. maximum distance
• Supply hopper lids for non-manufacturer supplied vacuum receivers or loaders
Extruder Monitor Control Options
• Co-extrusion IBM-compatible Pentium based industrial graphical control system with
touch screen includes:
• Integrated PC/Touch screen
• For use with up to six blending systems or extruder rate monitor units
without haul-off control
• Controls extruder speeds, layer percentages, and blender recipes.
• Complete with all necessary hardware, software and communications
requirements
• Co-extrusion IBM-compatible Pentium based industrial graphical control system with
line speed control (haul-off) and touch screen includes:
• For use with up to six blending systems or extruder rate monitor units
with haul-off control
• Controls overall yield (weight/length), weight per area and thickness.
• Communications wires and cables are not included.