Airaid 300-254 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
REV.10.22.13
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for questions
regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and packaged. Check that no parts are
missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air filter element is protected from direct exposure to wa-
ter and debris; care should be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILTY! The air filter is
reusable and should be cleaned periodically.
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
10. Install the supplied hump hose (#5) onto the filter
adapter using two #72 hose clamps (#17). Leave the
clamps loose for now.
13. Double check your work!
Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight.
14. Reconnect the negative battery cables!
12. Install the Airaid Premium Filter (#1) onto the
filter adapter and tighten the clamp. Install the weather
strip onto the top of the CAB starting at the right fend-
er and working your way towards the radiator.
11. A) Install the Air aid Intake Tube (#2) into the
factory turbo elbow and then into the hump hose. Ad-
just for fit, and then tighten all three hose clamps. Re-
install the intake temperature sensor and Mass Air
Flow sensor into the Airaid Intake Tube using three 8-
32 button head screws (#7) and #8 flat washers (#8).
Do Not Use The Factory Screws! B) Reinstall the
factory wiring harness anchor into the hole in the
Airaid Intake Tube.
A
B
FILTER IDENTIFICATION
700-469 Airaid Oiled Media 701-469 Airaid SynthaMax Dry Media - Red
702-469 Airaid SynthaMax Dry Media - Black 703-469 Airaid SynthaMax Dry Media - Blue
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
Synthamax Air Filters do not require oil.
Service air filter as needed by cleaning
with common non-petroleum all-purpose
household cleaner and water. Simple
Green®, Formula 409® or equivalent
works great. Apply cleaner to outside of
air filter and allow to soak. Then flush
filter clean from the inside out with a gar-
den hose and repeat steps if necessary. Do
not apply high pressure water or air to
clean filter. Allow filter to air dry and re-
install.