Turbo upgrade install options – Airaid 300-269 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
REV.10.23.13
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-
days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILTY! The air filter is reusable and should be cleaned periodically.
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
10. Double check your work!
Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight.
11. Reconnect the negative battery cables!
Airaid’s Part Number 300-269 can be installed
on vehicles with aftermarket turbo inlets up to
5” with the use of pn KIT 140-500. Please
contact Airaid, or your nearest Retailer, for
other sizing options.
KIT 140-500
1 Qty 5” silicone Hump Hose
2 Qty # 80 Hose clamp
Turbo Upgrade Install Options:
FILTER IDENTIFICATION
720-472 Airaid Oiled Media 721-472 Airaid SynthaMax Dry Media - Red
722-472 Airaid SynthaMax Dry Media - Black 723-472 Airaid SynthaMax Dry Media - Blue
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
Synthamax Air Filters do not re-
quire oil. Service air filter as
needed by cleaning with common
non-petroleum all-purpose house-
hold cleaner and water. Simple
Green®, Formula 409® or equiva-
lent works great. Apply cleaner to
outside of air filter and allow to
soak. Then flush filter clean from
the inside out with a garden hose
and repeat steps if necessary. Do
not apply high pressure water or
air to clean filter. Allow filter to
air dry and reinstall.