Filter identification – Airaid 300-283 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-
days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter is reusable and should be cleaned periodically
.
13.
Double check your work!
Make sure there is no foreign material in the intake path.
Make sure all clamps, hoses, bolts, and screws are tight.
Double check the hood clearance!
Reconnect the negative battery cable!
10. Set the Airaid Cool Air Box into the cradle and se-
cure it using the factory hardware removed in step #2.
11. Reinstall the factory air intake tube and tighten the
two hose clamps.
12. Install the Airaid Premium Filter onto the Filter
Adapter inside the Cool Air Box. Install the Weather-
strip onto the Cool Air Box as shown, with the contour
rolling away from the Filter.
REV.01.13.15
FILTER IDENTIFICATION
720-476 Airaid Oiled Media 721-476 Airaid SynthaMax Dry Media - Red
722-476 Airaid SynthaMax Dry Media - Black 723-476 Airaid SynthaMax Dry Media - Blue
Synthamax Air Filters do not require oil.
Service air filter as needed by cleaning
with common non-petroleum all-purpose
household cleaner and water. Simple
Green®, Formula 409® or equivalent
works great. Apply cleaner to outside of
air filter and allow to soak. Then flush
filter clean from the inside out with a
garden hose and repeat steps if neces-
sary. Do not apply high pressure water
or air to clean filter. Allow filter to air
dry and reinstall.
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!