Airaid 300-626 User Manual
Page 2
Instructions Revision
03-05-12
Contact your nearest Airaid dealer for an Airaid Intake System
for your car, truck or SUV.
The sound of power...The “whistle” means its working!
5. Reinstall the resonator and tighten the bolt that secures it to
the intake manifold. Reinstall the intake tube, tighten the hose
clamp, and reconnect the intake temperature sensor.
Re-connect the negative battery cable!
Gasket
Spacer
3. Install the Poweraid Spacer into the intake manifold as
shown. Make sure the spacer is seated correctly over the two
alignment pins on the intake manifold. Make sure the “flow”
arrow printed on the spacer, points towards the intake manifold
and away from the throttlebody. Next install the fiber gasket and
the throttlebody.
4. Install the provided bolts and washers thru the throttlebody
and Poweraid Spacer and tighten to the manufacturer's specifi-
cations.