Airaid 400-633 - Manual (Page 2)

Instructions Revision
02/11/10
Contact your nearest Airaid dealer for an Airaid Intake
System for your car, truck or SUV.
The sound of power...The “whistle” means its working!
3. Insert the four 6mm x 75mm bolts (#3) with washers
(#4) thru the throttlebody, one gasket (#2), and thru the
Poweraid Spacer (#1), and into the intake manifold.
Tighten all four throttle body bolts evenly, to the
manufacturer’s specifications. Do Not Over
Tighten The Bolts!
Gasket
Spacer
4. Re-install the factory intake tube onto the throttle
body and the airbox lid, and tighten the hose clamps.
Re-connect the breather hose to the factory intake
tube.
Re-connect the negative battery cable!