Airaid 450-613 - Manual (Page 2)

4. Reinstall the intake tube, and tighten the hose
clamps.
Reconnect the breather hose to the intake tube.
6. Re-connect the negative battery cable!
Instructions Revision
02/22/10
Contact your nearest Airaid dealer for an Airaid Intake
System for your car, truck or SUV.
The sound of power...The “whistle” means its working!
3. Install two bolts (#2), and washers (#3) thru the
throttle body, thru the gasket (#4), thru the Poweraid
Spacer (#1), and into the intake manifold as shown.
Use caution to retain the factory o-ring gasket on
the plastic intake manifold.
Next install the remaining bolts in the bottom holes of
the throttle body, and tighten evenly to the manufac-
ture's specifications. Do Not Over Tighten The Bolts!
Gasket
Spacer
Bolts &
Washers
5. Inspect & test the throttle linkage for full open
and closed travel before driving.