Filter identification – Airaid 300-786 User Manual
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for questions
regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and packaged. Check that no parts are
missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air filter element is protected from direct exposure to wa-
ter and debris; care should be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter
is reusable and should be cleaned periodically.
10. Reconnect the air sensors and harness anchor.
11. Double check your work. Make sure all Clamps
are tight and reconnect the negative battery cables.
REV.01.13.15
FILTER IDENTIFICATION
850-357 Airaid Oiled Media 851-357 Airaid SynthaMax Dry Media - Red
Synthamax Air Filters do not re-
quire oil. Service air filter as
needed by cleaning with com-
mon non-petroleum all-purpose
household cleaner and water.
Simple Green®, Formula 409®
or equivalent works great. Ap-
ply cleaner to outside of air filter
and allow to soak. Then flush
filter clean from the inside out
with a garden hose and repeat
steps if necessary. Do not apply
high pressure water or air to
clean filter. Allow filter to air
dry and reinstall.
For your Oiled media
filter we suggest using
the AIRAID Filter
Tune-Up Kit!
8. Tighten all three Intake Clamps at this time.