Extreme Networks BlackDiamond 8800 Series - Manual (Page 33)

I/O Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide 33
The G48Tc I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
● POE present
For information about the LEDs and their activity on the G48Tc I/O module, see “I/O Module LEDs”
on page 38 .
10G4Xc I/O Module
The 10G4Xc I/O module ( Figure 17 ) has four unpopulated XFP-based 10-gigabit Ethernet ports.
Figure 17: 10G4Xc I/O Module
The default configuration of the 10G4Xc I/O module is as follows. All ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 10G4Xc I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the 10G4Xc I/O module, see “I/O Module LEDs”
on page 38 .
10G4Xc 10G4Xc 10GBASE-X XFP 41614
Module status LEDs
10 Gbs ports
BD_155