Extron electronic AVTrac 42-122-xx - Manual (Page 19)

AVTrac • Installation 17
7-4 Glue or tape the carpet to the floor and side ramps.
Refit carpet
7-5 Using the provided template, trim the wall
baseboard to fit snugly around the track. Attach the
baseboard to the wall.
Use template to cut base board
7-6 For 42-122-xx models, attach the provided rubber
strip to the cover track raceway using double-sided
adhesive tape (provided).
For 42-121-xx models, cut a strip of the finished
carpeting and glue it to the cover track raceway.
Attach carpet tile to track raceway
Reattach base board to wall
N Do not use the supplied tape to attach the
carpet to the ramp. The tape is intended
only for the attaching the rubber inlay strip
to the cover track.