Winterizing and long-term storage, Maintenance, 2000psi pressure washer – All Power APW5022 User Manual
Page 16
5
1
Winterizing and Long-Term Storage
FOLLOW ALL OF THE ABOVE SHUT-DOWN PROCEDURES,ADDING
THE FOLLOWING STEPS….
•
After disconnecting the water supply, and before disconnecting the
high-pressure hose, turn the pressure washer on for 2-3 seconds, until any
remaining water in the pump exits. Turn unit off immediately.
CONTINUED USE OF THE PRESSURE WASHER WITHOUT
WATER SUPPLY ATTACHED WILL CAUSE SEVERE DAMAGE TO
THE UNIT!
•
Always store the pressure washer, parts, and accessories in an area with a
temperature above 0° C (32° F).
WARNING: FAILURE TO COMPLY WITH THESE STORAGE
INSTRUCTIONS WILL RESULT IN DAMAGE TO THE PUMP
ASSEMBLY
.
Maintenance
•
This pressure washer is supplied with a closed lubrication system, so no
addition of oil is needed.
•
Check all hoses and accessories for damage prior to use.
•
Check the water intake filter periodically for deposits. Clean this filter
regularly for maximum performance.
2000PSI Pressure Washer