Allmand Brothers TLB6235 Tractor - Manual (Page 17)

17
LOADER
The loader assembly is manufactured to handle most excavation and landscaping projects.
Critical locations on the loader arms and cylinder mounts are reinforced with plate steel to
add durability. The pivot points of the loader are constructed of high strength steel to
create a wear resistant joint.
The bucket assembly is manufactured to provide a structurally stable container to excavate,
transfer, and load most types of product. The cutting edge is reinforced by a 1/2" thick
grader blade material spanning the full width of the bucket. The bucket working capacity is
1/2 cubic yard.
TIRES and WHEELS
The TLB 6235is standard equipped with, 12-16.5 12 Ply tubeless tires for the front and
14-17.5 14 Ply tubeless tires for the rear. Recommended tire pressure for the rear tires is
75 psi max. Inflate front tires to 80 psi maximum.
BACKHOE
Refer to the ALLMAND Backhoe Operators Manual for any general information.
ENGINE - ISUZU DIESEL
Power is provided by a ISUZU 3CD1 32.7 HP., four-cycle, three cylinder, water cooled
diesel engine. (Horsepower rating is made with engine at 3000 RPM) Engine includes:
low oil pressure sensor, high water temperature sensor (these sensors operate warning
lights on the dash panel. Tractor is not equipped with automatic shutdown systems), 12
VDC electrical system with starter, glow plugs, fuel solenoid and 20 amp. regulated alterna-
tor charging circuit. Features like full pressure lubrication, Zexel individual injection pumps,
quick and easy access to routine service areas and use of quality, long lasting components
provide a durable and dependable power source.