Epson EH-TW5000 - Manual (Page 26)

24
Viewing Images at a Preset Image Quality(Memory Function)
After menu commands such as "Image" has been used to adjust the projected images, the adjustment
values can then be saved (Save Memory).
In addition, the saved data can be retrieved easily, so that you can enjoy viewing images with the
adjusted settings at any time (Load Memory).
Viewing Images at a Preset Image
Quality (Save Memory)
Saving, Loading, Erasing and Renaming
Memory
Saving, Loading, Erasing and
Renaming memory
Adjust each of the settings to the values to be
saved.
Press , and select "Save Memory".
The Save Memory screen is displayed.
Select the memory name to register the
adjustments to from Custom1 to Custom2, and
press or .
Memory names with appearing beside them
cannot be selected.
When preceding the memory name is green, this
indicates that adjustments are already saved to
memory.
Select an already saved memory name, and press
or .
A confirmation message will be displayed.
If you select "Yes", the previous memory content is
erased, and the current adjustment values are saved.
Save Memory
Load saved memories.
Load Memory
Press , and select "Load
Memory".
The Load Memory screen will be displayed.
Select the target memory name.
The adjustments that can be saved to memory are
as follows.
Only two adjustments can be saved to memory.
"Rename Memory" is only available for the EH-
TW5000.
Contrast Enhancement *
Displayed for input sources other than computer
Image
Sharpness
Auto Iris
Advanced
Standard
Abs. Color Temp.
Brightness Control
Advanced
Gamma
RGBCMY
Color Mode
Color Saturation
Tint
Brightness
Contrast
Skin Tone
RGB
Color Gamut *
* EH-TW5000 only