Aquatic AV AQ-AD300.2 - Manual (Page 15)

SYSTEM DIAGRAMS
15
www.aquaticav.com
AQ-AD300.2
CUSTOM WIRING SOLUTIONS
Powering two speakers with a single amplifier
channel.
In some cases, there might be a need to drive
two speakers with a single amplifier channel.
This configuration is possible providing that a 2
ohm load is maintained at the amplifier output.
To the right are examples of both parallel and
series wiring applications for proper impedance
matching. Note the way that while parallel wiring
divides each speakers impedance, series wiring
adds each speaker impedance together.
In order to utilize a low-level aftermarket input switch, it’s necessary to convert the
stock high-level outputs to low-level before the input switch itself. The diagram below
shows an example of this kind of switched input.
CUSTOM WIRING SOLUTIONS
8
4
4
4
4
2