Aquatic AV AQ-DM-4UBT - Manual (Page 2)

GETTING STARTED
2
www.aquaticav.com
AQ-DM-4UBT
• AQ-DM-4UBT Digital Media Locker™
• 2-Way RF Wireless Remote Control (AQ-RFDM-4U)
• USB to 30-pin iPod™ Cable
• 3.5mm to 3.5mm Jack Cable
• Wiring Harness (AQ-UNH-2)
• Six (6) Stainless Steel Mounting Screws
• One (1) CR-2430 Battery
• Mounting Template
• Owners Manual
1. 12-pin Watertight Harness
The 12-pin harness supplies power and ground connections to the Digital Media Locker
and four (4) speaker channel output connections from the Digital Media Locker.
Do not cut or modify the 12-pin harness on the Locker side or warranty will be void.
CONTENTS
INSTALLATION
2. FM Radio Antenna Jack
Connect antenna (AQ-ANT-1 sold separetely) to female antenna receptacle. For best
FM performance make sure the antenna is extended to the highest achievable position.
3. Auxiliary Outputs
Allows external amplifiers to be connected to power additional speakers.
4. 12V DC External Trigger
Allows for an external light or relay to be triggered (350mA max load).
1
2
3
4
FM Radio Antenna Jack
12-pin Watertight Harness
RCA Auxiliary Output
External 12V DC Trigger