ARAG Alfa 310 - Manual (Page 2)

via Palladio, 5/A - 42048 RUBIERA (RE) - Italy - tel. + 39 0522 622011 - Fax +39 0522 628944 - www.aragnet.com Cod. D20198_GB-m00
Seed sensor XX! No signal - Alfa 310 is not receiving the signal from seed sensor on line XX
Shaft sensor XX! No signal - Alfa 310 is not receiving the signal from shaft Rev. sensor XX
Speed sensor! No signal - Alfa 310 is not receiving the signal from speed sensor
Rev. sensor X! No signal - Alfa 310 is not receiving the signal from rev. sensor X
seeding exceeding max. limit - Number of seeds per metre exceeds maximum set value
seeding below min. limit - Number of seeds per metre is below minimum set value
Row XX: seeding exceeding max. limit - Number of seeds per metre on seed row XX exceeds maximum set value
Row XX: seeding below min. limit - Number of seeds per metre on seed row XX is below minimum set value
Row XX: Seeding tube clogged - Seeding tube is clogged or seed sensor for row XX has low efficiency
Row XX: no seeding - Seeds are not detected on row XX
Impeller X! Speed too high - Impeller X speed exceeds maximum set value
Impeller X! Speed too low - Impeller X speed is below minimum set value
SD card not available - Memory card is not inserted
SD card writing locked out - Memory card writing locked out
Impossible to save the file - No space available or damaged memory card
Slow down! Maximum speed reached - Vehicle speed exceeds maximum set value
Row XX: no fertiliz. (A) - Fertilizer A is not detected on row XX
Row XX: no fertiliz. (B) - Fertilizer B is not detected on row XX
Row XX: Fertilizer tube clogged (B) - Seeding tube is clogged or fertilizer sensor B for row XX has low efficiency
Shaft XX: No rotation - No rotation of shaft XX is detected
- Seeding tube is clogged or fertilizer sensor A for row XX has low efficiency Row XX: Fertilizer tube clogged (A)
2 3 1
ha
7.84
Job : Job3
4:36 38
hh:mm rpm
2
Rev. sensor 1 ! No rotation
12:01
s/m
19.8 1
km/h
5.8
4
1 2 3
6
7
8
9
10
2.2
cm
38
24
1.8
rpm
rpm
ha/h
hh:mm
4
4b
4
4c
4d
5
4a
5b
5c
5d
5a
5e
x x
x
4e
1
2
3
4
4a
4b
4c
4d
Number of seeds per meter: average value or per row
Selected seed row: press
/ to change
Chart showing seeding rate deviation from setting
Seed row number
Seed spacing maximum tolerance
Seed spacing deviation
Machine speed or top speed reached during current job
Maximum speed indicator
Seed spacing minimum tolerance
Double fertilization enabled (sensor A + B)
Single fertilization enabled (sensor A)
Single fertilization enabled (sensor B)
Work data
Seed spacing
Rotation speed, rev counter 1
Rotation speed, rev counter 2
Performance
Work time
Time
Alarms
Name of current job
Work area
Selected rev counter
3a
4e
5
5a
5b
5c
5d
5e
6
7
8
9
10
x
1
x
3a
Max
Rev. sensor 1 ! No rotation
Position sensor! No signal - Alfa 310 is not receiving the signal from seed state sensor