Ascaso KAP User Manual
Page 19
19
ENGLISH
MAKING COFFEE
This machine has been designed
to be used with FAP coffee
capsules. Consult with your
distributor about using any other
type of capsule. They could
damage the machine.
1. Connect the machine, placing
the general ON/OFF switch (1)
in position "I". On ONE models,
the ON/OFF
7
pilot light lights
up.
2. Wait until the machine reaches
the correct temperature and
is ready to make coffee. For
ONE models, the wait is
approximately 1 minute. For
TRONIC ONE, TRONIC and
TRONIC DUO models, wait
until the illuminated espresso
2
and lungo
3
buttons stop
blinking and are constantly lit.
During this time no operation
of any kind may be carried out.
For TRONIC and TRONIC
DUO models, the water
4
and steam
5
buttons are
lit throughout the warm-up
process.
3. Open the draw to insert the
capsules
11
, place the capsule
in the slot, ensuring that it is
inserted correctly (the narrower
part goes in first) and close the
drawer so that it shuts tightly.
NOTE:
If the drawer to insert the capsules
11
is not shut correctly, completely
and tightly closed, the machine
will not work. Make sure that it is
correctly aligned when closing.
4. Place the cup on the tray
8
,
over the centre hole of the cup
rest
15
.
5. Press the espresso
2
or
lungo
3
button (according to
version) to begin dispensing
the coffee. On ONE models,
press the espresso button
again to stop dispensing.On
TRONIC ONE, TRONIC and
TRONIC DUO models, the
button pressed remains lit while
the others go out. Dispensing
stops automatically once the
programmed amount of coffee
has been made, and all of the
buttons light up again.
3