Eneo HDC-2180Z03 D - Manual (Page 16)

Operating Instructions
16
FULL-HD AF ZOOM CAMERA
3D-NR is a very sophisticated and powerful time-based noise reduction technology
by monitoring the noise for the several video frames and defining and eliminating
them consecutively at low light. Higher setting reduces noise much more but results
in losing the sharpness and the tail effect or the motion blur for the fast moving
target at low light.
3-4. BLC
3-5. HLC
4. 3D-NR
: Cuts out the highlight area with black mask and excludes it from compensation.
Lower HLC LEVEL cut out video from the lower level.
: Improves the visibility for the dark object by the bright back light.
Outside area of BLC window can over saturate.
BLC has a target window for compensation and its size and position can be set
by H-POS, V-POS, H-SIZE and V-SIZE.
3-2. WDR
3-3. D-WDR
: Improves the visibility for the high bright area and the dark area by the double
captures of image with LONG and SHORT exposures. With WDR ON, the
frame rate becomes half by the double captures. WDR level can be selected
from LOW, MID and HIGH. Care should be taken to select this mode because
video may lose its quality in some environments by the over compensation.
※ CVBS video signal:Connecting 2nd video to CVBS port disables WDR function
temporary. It should be considered when installer adjusts the video with
installation monitor via CVBS video signal.
: Improves the visibility by compensating the video gain for the dark area.
Noise can increase in the dark area accordingly.
3-1. NORMAL (default)
: ON enables MOTION DEBLUR to reduce the motion blur in a certain indoor
enviroment. Noise or color rolling can increase.
2-6. MOTION DEBLUR (default: ON)
3. SCENE ENHANCE
: Optimized for the normal indoor and outdoor in the good lighting condition.