Eneo HDB-1080Z03IR D - Manual (Page 11)

11
EN
1. ▲ : Zoom In
2. ▼ : Zoom Out
3. ◄ : Focus Near
4. ► : Focus Far
Set the video format according to system, EX-SDI or HD-SDI
To select the camera’s output video format (EX-SDI or HD-SDI), use the Video format
Switch on the side of the camera. Only one format can be used at a time (see also “Using
OSD controller”).
OSD menu startup
Press ‘ ●’ (OSD menu Joy stick key) down for about 2 seconds to access the setup menu
mode.
1M~120M via RG59u or 5C2V cable
Camera (HD-SDI)
DVR (HD-SDI)
Camera (HD-SDI)
1M~120M via
RG59u or 5C2V
cable
350M+ via RG59u or
5C2V cable
HDA-3000E
(EX-SDI)
HDA-3000E
(EX-SDI)
1M~120M via
RG59u or 5C2V
cable
DVR (HD-SDI)
Camera (EX-SDI)
350M+ via RG59u or 5C2V cable
HDA-3000E
(EX-SDI)
1M~120M via
RG59u or 5C2V
cable
DVR (HD-SDI)
350M+ via RG59u or 5C2V cable
Camera (EX-SDI) DVR (EX-SDI)
Camera (HD-SDI)
DVR (HD-SDI)
1M~120M via
RG59u or 5C2V
cable
1M~120M via RG59u or
5C2V cable
HDA-3000E
(HD-SDI)
HDA-3000E
(HD-SDI)
1M~120M via
RG59u or 5C2V
cable
i Lens Initializing is strongly recommended at the first stage of setup menu control.
ZOOM/FOCUS > LENS INIT > Press the joystick ‘ ☟’ straight down for about 2 seconds.
MENU V5.xx
1. ZOOM/FOCUS
2. EXPOSURE
3. SCENE ENHANCE
4. 3D-NR
5. DAY/NIGHT
6. PICT ADJUST
7. SPECIAL
8. SYSTEM
9. EXIT ↵
↵
↵
↵
↵
NORMAL
MID
EXT
SAVE&EXIT
↵
Direct control menu
MAIN DEFAULT DESCRIPTION
ZOOM/FOCUS - Sets FOCUS and ZOOM relative fuctions.
EXPOSURE - Sets EXPOSURE MODE, BRIGHTNESS, SENS-UP, AGC and MOTION DEBLUR.
SCENE ENHANCE NORMAL
SCENE ENHANCE provides the several ways to enhance the video in the
various environments with the settings in NORMAL, WDR, D-WDR, BLC
and HLC.
3D-NR MID Sets 3DNR level. LOW, MID, HIGH
DAY/NIGHT EXT or AUTO
Sets DAY / NIGHT to EXT, AUTO, COLOR, B/W and COLOR D/N. Setting
EXT mode for cameras with IR-LED, AUTO mode for none IR-LED camera
types.
PICT ADJUST Sets WHITE BAL, SHARPNESS, COLOR GAIN, GAMMA
SPECIAL
Sets MIRROR/FLIP, PRIVACY, MOTION, PIXEL DEFECT, TITLE SET, DISPLAY,
DEFOG, POINTING ZOOM
SYSTEM
Sets TV SYSTEM, RESOLUTION, COMM.SETUP, LANGUAGE and FACTORY
DEFAULT
EXIT
SAVE & EXIT – Exits the menu after saving the parameters. EXIT – Exits
the menu without saving the menu.
Further information
The manual is available from the eneo web site at www.eneo-security.com or from the CD
supplied with this product.