Eneo VKCD-1332SM/3.8 - Manual (Page 16)

6
3. Installation
Make sure the power is removed before the
installation !
. Stick the guide pattern on the wall or ceiling.
. Drill two holes according to the the guide pattern,
then insert anchors into the drilled holes.
3. Draw out power / video wires to the connecting
places.
4. Fix the camera to the ceiling using two screws.
5. Adjust desired focus and scene by turning and
moving the 3-axis camera bracket by hand.
6. Put the dome cover over the base.
7. Fix the dome cover on the base by covering.
Guide pattern
Dome base
Mounting screw
Dome cover