Eiki LC-XB21B - Manual (Page 10)

10
Part Names and Functions
Top Control
⑦
LAMP REPLACE indicator
Turn yellow when the life of the projection
lamp draws to an end. (p.54, 61)
⑥
WARNING indicator
Emit a red light when the projector detects
an abnormal condition. This also blinks
red when the internal temperature of the
projector exceeds the operating range.
(p.51, 61)
②
KEySTONE ▲▼ buttons 
Correct the keystone distortion. (p., 41)
④
POWER ON/STAND-By button
Turn the projector on or off. (p.18, 19)
⑤
POWER indicator
– Lights red when the projector is in stand-
by mode.
– Lights green during operations.
– Blinks green in the Power management
mode.
– Blinks red during cooling down.
③
INPUT button
Select input source. (p.5, 34, 35)
⑨
SELECT button
– Execute the selected item. (p.0)
– Expand or compress the image in Digital
zoom mode. (p.33)
①
MENU button
Open or close the On-Screen Menu. (p.0)
⑧
VOLUME +/- buttons 
Adjust the volume level. (p.3
）
 POINT (▲▼◄►) buttons
②
and
⑧
can be used as the point (▲▼◄►)
buttons.
– Select an item or adjust the value in the
On-Screen Menu. (p.0)
– Pan the image in Digital zoom + mode.
(p.33)
①
②
③
⑤
⑦
⑧
⑨
④
⑥