Connecting a dc power cord – H3C Technologies H3C S12500 Series Switches User Manual
Page 14
11
Figure 15 Installing the power cable bracket
2.
Insert the AC power cord into the power receptacle.
3.
Use a cable tie to secure the power cord to the tie-wrap tab on the power cable bracket.
4.
Repeat steps 2 and 3 to secure other AC power cords to the power cable bracket.
5.
Connect the other end of the AC power cord to the power source.
Figure 16 Connecting the AC power cord
Connecting a DC power cord
WARNING!
A plastic protection cover is installed in front of the grounding strip to protect operators from being
shocked. Remove the protection cover before connecting power cords and then install the protection cover
in time.
To connect a DC power cord:
1.
Connect one end of the blue DC power cord to the negative terminal (–) on the power strip, and
fasten the screw with a Phillips screwdriver.